Cultiplow Platinum Rigid

Pronfondeur de travail
15 to 45 cm
Largeur de travail
2,50 to 4 m
Besoin de puissance pour tracter
90 to 250 ch

CULTIPLOW® is a solo subsoiler using a unique decompaction concept. The machine is equipped with blades with offset point, technology patented by AGRISEM ensuring optimal decompaction over the entire width.

CULTIPLOW® loosens without mixing the soil horizons, to keep the fertility of the upper horizons. This machine can be used to help the transition to conservation techniques and direct seeding.

All the advantages of the TCS blade for subsoiling

  • The exclusive AGRISEM offset-point blade technology makes it possible to crack the ground without disturbing the horizons.
  • The fine point, positioned at the front, will allow penetration in hard and compacted soil, and its sharpening angle allows to break the plow pan.
  • Moving through the ground, the fin gradually lifts the ground, forming a “wave” effect.
  • There is no disturbance of soil horizons and all fertility and organic matter are retained on the surface

Heavy duty frame resistant to stress

Cultiplow platinum is equipped with an oversized 200x200mm single-beam chassis with a 3-point Category 3 coupling hitch, allowing the torque of the most powerful tractors to be transmitted serenely. It also offers a large clearance (100cm).

For each use him Cultiplow

Cultiplow Platinum can optionally be fitted with shear bolt or non-stop spring or hydraulic safety blades. These safeties are designed to provide ample clearance to ensure quick and complete blade clearance in the event of an obstacle. It is also possible to position the blades in line or alternately to provide more space for the passage of stubble.

Bolted wear parts

The blade, made from the hardest and most resistant steels (type Hardox® 500) is protected at the front by interchangeable leading edges. These can be fitted with carbide inserts and, for extreme conditions with particularly worn soils, the blade can be reloaded on the sides. The share, made as a foundry part, is interlocked on the blade base in a self-locking manner and then held by a bolt at the rear. The blade base and the retaining bolt are thus completely protected from the risk of wear.

Carbide protection

The shares, which have a reinforced tip as standard, can also be fitted with tungsten carbide inserts either only on the tip or completely on the tip and aileron with the Easy-Protect interchangeable tip version. AGRISEM has chosen to use exclusive BETEK carbide inserts with feedback which ensure the best resistance to wear and impact against stones.

Frame

Cultiplow Platinum is equipped with a folding frame with double beams (160 & 200mm) which ensure great strength, allowing to endure a high pulling torque under difficult conditions.

1/9

Cage roller Ø526

T-Sem roller Ø620

U-SEM roller Ø580

Steel-pack roller Ø600

Coupling pins cat. N°2

Extra cost for lamps

2,50 m 3,00 m 3,50 m 4,00 m
Transport width (m) 2,50 3,00 3,50 4,00
Power mini-maxi (hp) 90 - 180 110 - 210 150 - 230 170 - 250
Number of blades 3 4 5 6
My Agrisem-photo

NEED A SPARE PARTS ?

SIMILAR PRODUCTS

Cultiplow Gold rigid

Read more

Cultiplow Gold Foldable

Read more

Cultiplow Platinum HD

Read more

NEWSLETTER

Newsletter

Technical support

Need some information? Do not hesitate to contact our technical team!

Our network

Find your AGRISEM dealer.

Service parts

Quickly find your spare parts on MyAgrisem.