DSA 1600 / 2200 / 3200

1600 to 3200 L
1200 to 1420 kg
2000 to 3000 L/h

The DSA 1600/2200/3200 are ISOBUS compatible hoppers with capacities of 1600, 2200 and 3200 litres.

They are segmented to allow fertiliser to be added during drill. The distributions are made of stainless steel with grooves.



  • Optimization of the fertilizer provided by limiting the risk of evaporation or burning of the plant.
  • Optimal availability for the plant with the fertilizer dissolved in the soil available to the roots even in dry conditions.
  • Possibility of fertilizing only near the plant to ensure better domination against weeds.
  • This phenomenon is even more marked in Conservation Agriculture where the organic matter of cover crop can create nitrogen hunger on the surface and in the row which will penalize the emergence of weeds.
  • Better plant start-up, increased number of ears and improved yield.
  • Possible reduction in the amount of fertilizer added due to the better consumption of the fertilizer.
  • Save time by reducing one pass.
  • Reduced risk of air pollution (by evaporation) and water in the event of runoff.


  • Stainless steel metering unit as standard with dosing by splines and agitator system allowing the efficient distribution of the main types of fertilizer, whether dusty or not, with a tendency to agglomerate or not, or very light such as corks organic fertilizer.
  • Easy loading due to the wide and flared hopper and large opening by rolling up the cover tarpaulin.  This allows direct loading with the bucket or with a suitable trailer. Rolled up tarpaulin is safe and does not risk being damaged when approaching the bucket or big-bags.
  • Upper hopper grid to effectively prevent any risk of blockage due to blocks or torn piece of bag.
  • Possibility of using a front ramp associated with the DSF to place the fertilizer in full with spark gaps or located on the sowing lines with straight descents.
  • Dose control system allows the dose to be modulated during use.


The design of the hopper has been specially studied to offer the best possible visibility due to the plunging shape towards the front.

Le gabarit de la DSA offre une grande capacité pour plus d’autonomie. Par rapport à une trémie frontale, les tuyaux d’alimentation sont plus courts ce qui permet d’alimenter des outils de plus grande largeur avec réactivité.

The DSA are also equipped with reflective panels, headlights, position lights and warning lights to ensure safe transport. LED work lights are also available as well as an analog camera.

The DSA 1600/2200/3200 front hoppers are equipped with 2 stainless steel volumetric metering unit with spline which allow the distribution of the main types of seeds, fertilizers and cover crop. They are equipped with an adjustable spoon system and an agitator to ensure efficient filling and protect the most fragile seeds.


  • Efficient DPAE flow regulation
  • ISOBUS connection
  • Regulation of the sowing rate
  • Automated calibration test
  • Tramline management
  • Forward speed measured by GPS receiver (or optional radar)
  • Pre-start lunching
  • Diagnostic mode
  • Management of 2 types of products at the same time

My Agrisem-photo





Technical support

Need some information? Do not hesitate to contact our technical team!

Our network

Find your AGRISEM dealer.

Service parts

Quickly find your spare parts on MyAgrisem.